Mold machine

Puring casting by cavity casting molding, operation simple and reliable,equipment is made by mature technology and superior process .
Cavity hydraulic opening and closing mode, easy operation and maintenance.
Cnc machining, high precision of cavity molding,The plate thickness is accurate and the flatness is good.
Mechanical core, plastic core tube, free erosion, long life.
The specifications are customized according to customer requirements. According to the thickness of the product,10wall panels can be produced at one time.
Can be equipped with electric heating and vibration system according to customers’ requirements.
Raw materials are widely used to produce various types of solid or hollow wall panels.

Composite wallboard

Composite wallboard is a new generation of high-performance building inner partition produced by industrialization. It is made up of a variety of building materials, replacing traditional bricks. It has the following obvious advantages: environmental protection, energy saving,no pollution, light earthquake resistance, fire prevention, heat preservation, sound insulation, quick construction.
The composite wall board adopts ordinary Portland cement, sand and fly ash or other industrial wastes, then adds polystyrene granules and a small amount of inorganic chemical auxiliaries, and cooperates with a fully automatic high-efficiency lightweight aggregate special mixing system. The air is introduced during mixing procedure to form
honeycomb honeycomb-shape stabilized pore, which further reduces the product weight and the material cost, and achieves the ideal heat preservation and heat insulation effect.

Demolding machine

A fully automatic plate dismantling machine can
be installed in a fixed position. It only needs 1 worker
to operate normally. The wall board of the whole
vehicle can be taken out at the same time within a few
minutes,The board dismantling process will not damage
the wall board, high efficiency, low operating costs.

Grouting transport system

The industrial hose pump is used as the grouting power. It only needs 1 hose to connect. one people to complete the grouting operation. The casting site is clean and efficient.
Advantages of industrial hose pumps:Special non-sealing structure, free from any leakage and pollution; Using advanced technology, the roller does not need any lubrication;The fluid absorbed by the pump is only in contact with the hose, and can convey various viscosity, density and corrosive fluid materials; Can transport solid particles, crystals, fiber materials and other magazines liquid materials; There will be no blockage and failure, self - absorption capacity and self -cleaning capacity, can be forward - reverse suction.

Maintenance system

The polystyrene granule light mixed mortar does not
require special heating curing. If the environment of the
production site is higher than 20 ° C for most of the day,the mold after pouring only need to stay by natural curing.
If the temperature is low, it only need to build a thermal insulation room,and install some radiators to make the temperature reach 20 ℃ within 2 hours of the mold car entering. After the hydration reaction begins, the heating equipment can be completely turned off.